Flat Rate
Showing 1–25 of 204 results
-
$725.0019 build kit OEM
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, oem case,pf940c frame,pf940c jig ,pf940c rails. oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection. Includes jig!!!
$725.00$100.00PF940v2 17/22 FRAME COATED GREY
THIS IS AN ODG FRAME THAT HAS BEEN COATED GREY.THAT IS WHY THEY ARE DISCOUNTED FROM THE OTHER FRAMESTHIS LISTING IS FOR THE PF940V2 G17/22 PISTOL FRAME IN FACTORY BLACK INJECTION MOLDING..THIS PRODUCT COMES WITH A PF940V2 FRAME,JIG,AND RAILS AND PINS.THESE HAVE A SHIPPING DELAY DUE TO HAVEING TO BE CERAKOTED.
$100.00$100.00PF940v2 17/22 FRAME COATED FDE
THIS IS AN ODG FRAME THAT HAS BEEN COATED FDE.THAT IS WHY THEY ARE DISCOUNTED FROM THE OTHER FRAMESTHIS LISTING IS FOR THE PF940V2 G17/22 PISTOL FRAME IN FACTORY BLACK INJECTION MOLDING..THIS PRODUCT COMES WITH A PF940V2 FRAME,JIG,AND RAILS AND PINS.THESE HAVE A SHIPPING DELAY DUE TO HAVEING TO BE CERAKOTED.
$100.00PF940v2 17/22 COATED BLACK FRAME
THIS IS AN ODG FRAME THAT HAS BEEN COATED BLACK.THAT IS WHY THEY ARE DISCOUNTED FROM THE OTHER FRAMESTHIS LISTING IS FOR THE PF940V2 G17/22 PISTOL FRAME IN FACTORY BLACK INJECTION MOLDING..THIS PRODUCT COMES WITH A PF940V2 FRAME,JIG,AND RAILS AND PINS.THESE ARE IN STOCK ANS SHIPPING WITHIN 1 BUSINESS DAY!!!
$70.00PF940SC 26/27 CORAL COATED frames
THIS LISTING IS FOR THE PF940SC 26/27 PISTOL BLANK .THESE ARE FRAMES THAT HAVE BEEN COATED CORAL !!!these come with rails and jigs
$100.00PF940SC 26/27 GREY COATED odg frames
THIS LISTING IS FOR THE PF940SC 26/27 .THESE ARE Y ARE ODG FRAMES THAT HAVE BEEN COATED GREY !!!these come with rails and jigs
$100.00PF940SC 26/27 FDE COATED odg frames
THIS LISTING IS FOR THE PF940SC 26/27 .THESE FRAMES THAT HAVE BEEN COATED FDE !!!these come with rails and jigs
$100.00PF940SC 26/27 BLACK COATED odg frames
THIS LISTING IS FOR THE PF940SC 26/27 PISTOL frame kit.THESE ARE ODG FRAMES THAT HAVE BEEN COATED BLACK!!!
$60.00
from: $120.00Bridge Blank-PF940V2 17/22 COMPLIANT pistol blank
THIS LISTING IS FOR THE PF940v2 G17/22 FRAME ONLY.
BLACK FRAMES HAVE NO WAIT!!! will ship next day.
NO JIG, NO PARTS INCLUDED. This is the new polymer 80 “bridge” frame that is ATF compliant. There is a few more processes that must be done to complete the frame. This is a culmination of allot hard work from polymer 80 and their partners to keep the building movement moving forward. These are compliant and are pretty easy to do.
TO SELECT YOUR OWN CUSTOM COLOR, SELECT THE CUSTOM COLOR OPTION FROM THE DROP DOWN MENU,THEN DURING CHECKOUT IN THE NOTES SECTION WRITE THE CERAKOTE COLOR YOU WANT THE FRAME TO BE.
CANCELLATIONS / REFUND REQUESTS WILL BE CHARGED 30% OF THE FINAL TOTAL.
from: $120.00$200.00Trevizo 19 BUILD KIT
This kit is perfect those that want to 3d print a g19 ,but already have a complete upper. This kit was inspired by a customer ,and has everything you need minus the upper. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$200.00
from: $120.00Bridge Blank- PF940C 19/23 COMPLIANT pistol blank
THIS LISTING IS FOR THE PF940C G19/23 FRAME ONLY.
BLACK AND FDE FRAMES HAVE NO WAIT!!! will ship next day.
NO JIG, NO PARTS INCLUDED. This is the new polymer 80 “bridge” frame that is ATF compliant. There is a few more processes that must be done to complete the frame. This is a culmination of allot hard work from polymer 80 and their partners to keep the building movement moving forward. These are compliant and are pretty easy to do.
TO SELECT YOUR OWN CUSTOM COLOR, SELECT THE CUSTOM COLOR OPTION FROM THE DROP DOWN MENU,THEN DURING CHECKOUT IN THE NOTES SECTION WRITE THE CERAKOTE COLOR YOU WANT THE FRAME TO BE.
CANCELLATIONS / REFUND REQUESTS WILL BE CHARGED 30% OF THE FINAL TOTAL.
from: $120.00$300.00X01 with BRACE – FCU for P320
THIS COMES WITH THE BRACE!!!!The X01 (Exo One) Exoskeleton is a drop-in PDW upgrade for the Sig Sauer P320 series of firearms that provides enhanced capabilities such as the ability to attach an SB Tactical arm brace or buttstock compatible with the SIG® MCX series (optional add-on). The X01 enhances the original firearm’s manual of arms with its integrated charging handle, which provides an “HK-style” downward release when locked to the rear. The fore-end of the weapon features three M-Lok slots that integrate with the grip module’s contours.
$300.00
$20.00Micro SD – LOTUS print ready
This is a reusable micro SD that is THE LOTUS AND IS print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE LOTUS. The micro SD has A LOTUS file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own LOTUS at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00Micro SD – Glocknofsky 19 print ready
This is a reusable micro SD that is GLOCKNOFSKY 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE GLOCKNOFSKY 19. The micro SD has A NOFSKY file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own GLOCKNOFSKY 19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00Stainless Glock 43 | 43X Barrel
1776 Supply Co has brought you THE BEST stainless Glock 43 drop in Barrel on the market. Complete your 9mm Glock slide with our dependable, elegant 43/43x Barrel.
$60.00G17 Replacement barrel stainless
Our Match-Grade Barrel for the Glock® 17 fits ALL generations of G17, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$56.00G17 Replacement barrel blk
Our Match-Grade Barrel for the Glock® 17 fits ALL generations of G17, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$65.001776 upper parts kit.
this is the upper parts kit that you all have been asking about. This is the well known slide parts kit that is known to the community to function great ,and to bring the best results for your builds. Tested, inspected, and warrantied by our company, these parts are the best of the best when it comes to to slide parts kits.
$65.00$56.00G19 Replacement barrel
Our Match-Grade Barrel for the Glock® 19 fits ALL generations of G26, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$56.00G26 Replacement barrel .
Our Match-Grade Barrel for the Glock® 19 fits ALL generations of G26, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00lower parts kit for Glock 26 After market
This is our trusted aftermarket lower parts kit for Glock 26. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00lower parts kit for Glock 17 After market
This is our trusted aftermarket lower parts kit for Glock 17. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00lower parts kit for Glock 19 After market
This is our trusted aftermarket lower parts kit for Glock 19. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00Micro SD – OBSIDIAN print ready
This is a reusable micro SD that is obsidian print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the freedom co dev obsidian . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE freedom co dev obsidian. The micro SD has all obsidian files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own obsidian at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$25.00$50.00Freedom Mac Trunnions
This is a set of trunnions for all freedom co dev team 3d print builds that have a printed upper. No longer do you have to search endlessly for a complete mac upper to finish your builds. Now just print and build them!!!
$50.00
