3D Printing
Showing 26–50 of 60 results
-
3D-G2C complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G2C in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G2C file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G2C at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick . https://www.youtube.com/watch?v=V11vW50Cv9s&t=40s
$325.007″ Complete Ar-15 3D Printed Kit
This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own AR-15 chambered in 5.56 ! Cheap ,controllable ,and most importantly AVAILABLE. The 5.56 is a great round to have in an AR-15 platform. The lower receiver and buffer tube system is identical to that of any 5.56 or .223 AR-15platform, this means you can swap any AR15 platform upper receiver onto this build, the best of both worlds in one!!! The lower receiver contained on this sd card uses NO HARDWARE…..I REPEAT,NO HARDWARE!!!! The SD card contains two files a raw STL file for modification ,AND A PRIINT READY GCODE THAT IS READY TO GO!!! just preheat ,auto hone, and print!
$480.00
$413.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$2,600.00Ghost gunner 3 CNC machine
NO WAIT! ORDERS SHIP NEXT DAY.
Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality.
The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, Polymer 80 and AK-47 lowers and frames. All existing jigs are compatible with GG3.
$2,600.00Ubar lower Hardware kit
This is the hardware kit necessary for all you builds that require an UBAR lower receiver. This hardware kit contains all the reinforcements and necessary bolts and plates to successfully your UBAR 3d print build.
$25.00$650.00D5K COMPLETE PARTS BOX
The new 3d printed kits are here!! This complete kits kit comes with everything needed to print, and complete a D5K in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with The D5K and all modifications already made for a successful print, Just insert the card and hit print. No need to make any modifications to the file.This box takes 3d print firearms building and puts in in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. The D5K is a semi-automatic, mag fed 22-LR.The files contained are designed and adjusted to be worked with a Ender 3v2 (which we sell),and is designed to work with the Polymaker PLA max ,tough pla.
$650.00
$15.00SG-22 BARREL NUT
This is a 3d printed barrelnut for your Sg-22, scallywag, or any other build that takes the SG diameter barrel nut. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this barrel nut is a great way to finish up any 22lr build.
$15.00
$35.0022LR BARREL LINER 5″
These are 5” 22lr barrel liners for for your proto barrel builds. Weather your are building a tubee-22 ,D5k,or sg-22 if you want to make your own proto barrel this is the liner you use.
$35.00
$25.0025 rnd 22lr magazine.
This is a 10 rnd magazine for all of our 22 lr builds. This mag will work for the D5K, the Goldblum, The SG-22, the scally wag, And any 22lr kit with the conversion bolt.
- WILL NOT SHIP TO STATES WITH CAPACITY BANS IN EFFECT.
$25.00
$25.0010 rnd 22lr magazine.
This is a 10 rnd magazine for all of our 22 lr builds. This mag will work for the D5K, the Goldblum, The SG-22, the scally wag, And any 22lr kit with the conversion bolt.
$25.00
$50.00SG-22 upper receiver
This is a 3d printed upper reciever for your SG-22, Scallywag, or any other build that takes the 22lr BCG. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this upper is a great way to spice up any 22lr build.
$50.00
$15.00D5k/Goldblum BARREL NUT
This is a 3d printed barrelnut for your D5K, goldblum, or any other build that takes the smaller diameter barrel nut. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this barrel nut is a great way to finish up any 22lr build.
$15.00
$25.00SG-22/Scallywag/22 handgaurd
This is a 3d printed handguard for your SG-22, Scallywag, or any other build that takes the Sg -22 barrel nut. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this handguard is a great way to spice up any 22lr build.
$25.00
$20.00Micro SD – 17 print ready
This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G17 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00
$20.00Micro SD – 26 print ready
This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00
$500.003D-17 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$500.003D-26 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$20.00D5K print ready Micro SD
This is a reusable micro sd that is D5K print ready. The micro sd has the D5K files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own D5K at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier ! Make sure your bed is level, and not to far or to close to the printing nozzle, a paper’s thickness works. Don’t forget your bed adhesion stick! The files on this Sd card are designed to work best with an ender 3V2 .while using pla+ max tough pla.
$20.00
$650.00D5K COMPLETE STATIC BOX
The new 3d printed d5k kits are here!! This complete kits kit comes with everything needed to print, and complete a D5K in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with The D5K and all modifications already made for a successful print, Just insert the card, and hit print. No need to make any modifications to the file. This box takes 3d print firearms building and puts in in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. The D5K is a semi-automatic, mag fed 22-LR.The files contained are designed and adjusted to be worked with a Ender 3v2 (which we sell),and is designed to work with the Polymaker PLA max ,tough pla. We recommend autohoning ,and preheating before every print.
$650.00
$550.00SG-22 COMPLETE PARTS BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SG-22 in your home. This kit comes with everything needed to get the job done ,including a micro SD card with he SG-22 and all modifications already made for a successful print, Just insert the card and hit print. No need to make any modifications to the file. This kit is taking 3d printing and putting it in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today.
$550.00
$700.00SG-22 COMPLETE BOX w upper.
The new 3d printed sg 22 kits are here!! This kit comes with everything needed to print, and complete a SG-22 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with he SG-22 and all modifications already made for a successful print, Just insert the card and hit print. No need to make any modifications to the file. This box takes 3d printed firearms and puts it in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today.
$700.00
$20.00SG-22 print ready Micro sd
This is a reusable micro sd that is SG-22 print ready. The micro sd has the sg-22 files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SSg-22 at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier
$20.00
