1776
Showing all 25 results
-
Trevizo 19 BUILD KIT
This kit is perfect those that want to 3d print a g19 ,but already have a complete upper. This kit was inspired by a customer ,and has everything you need minus the upper. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$200.00
$1,100.00THE JAKLE BUILD 80% BUILD KIT
We are proud to announce the long-awaited release of the JAKL build kit ! This platform is built around a 6105 monolithic upper receiver designed to be compatible with our Mil-Spec AR-15 lower receiver. The JAKL offers a buffer system that is fully captured in the upper receiver, shortening the overall length of the firearm. Completed with a rear Picatinny stock adapter, which allows for a side-folding brace,or any brace system / accessories to be attached to be securely attached to the firearm. The JAKL features a long-stroke piston design with a Carpenter 158 bolt and 4340 carrier that are an AK/AR hybrid. The side charging handle is ambidextrous, allowing the user to change positions to the left or right side of the receiver without the use of tools. Equipped with a tool-less 4-position gas block, this feature offers the ability to quickly adjust your gas block by hand when needed. Field stripping and removal of the JAKL carrier, recoil assembly, and sled assembly can all be done without tools for effortless cleaning. THIS KIT COMES WITH EVERYTHING NEEDED TO BUILD A BUFFERLESS, PISTON DRIVEN , 5.56 RIFLE ON YOUR OWN. This RIFLE KIT IS AMAZING, AND GIVES YOU THE ABILITY TO BUILD A RIFLE COMPARABLE TO OTHER $3000 PLATFORM FOR A THIRD OF THE COST.SLEEK RELIABLE ,AND EFFECIENT THIS RIFLE CAN EVEN FIRE WHILE FOLDED,ALL WHILE BEING AN AR-15 PLATFORM RFLE THAT WHILL TAKE MOST AR-15 ACCESSORIES.
$1,100.00FREEDOM MAC UPPER KIT
This is a complete hardware kit for your printed freedom mac printed upper. The upper that is produced with this hardware kit is compatible and interchangeable with all the mac 11 projects that were released by freedom co dev team. As of now there are 11 mac designs that utilize the printed upper and take away the need to find a metal mac-11 upper for your builds.
$80.00$500.00THE STAKK-X by Krrawn
This thing is finally available!!! BUT NOT FOR LONG!!!!! This is a complete 3d build kit for the STAKK.-X 9mm.THis is a limited run and will not be available for long, This build was designed from the ground up with perfection and performance in mind. Designed by an avid figure in our community. KRRAWN with a little help from 1776 brought one the most amazing builds to date to reality. Every millimeter of this build was carefully designed and is unique. From the precise texture, the thick stable size of the grip, the flared magwell, the lightning cuts, the RMR cuts, even the color choice of stainless slide black frame and red accents. Every piece was meticulously crafted to created a 1 of a kind performance weapon design. Don’t miss out on this deal and opportunity to get your hands on a very limited build that everyone will be after. Each build comes with a certificate of authenticity that is personally signed and wet stamp certifying ,and letting you know which number of this limited run you were lucky to receive. What are you waiting for? get your STAKK -x today.
$500.00$400.00
from: $875.00THE REVENANT COMPLETE 80% Kit
This is one of the coolest 80% build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture your own revenant chambered in 9mm! The revenant is a bi product of the dev collab 2022.Many great great minds from all over the country came together to bring you an amazing pdw. The revenant is 9mm, ump like PDW that looks and operates like a $3000 operating system. Everyone has been waiting for it and they are finally here.
from: $875.00OEM GLOCK 21 PARTS KIT
if you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and oem case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$670.00$625.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$625.00FREEDOM 19X 3D COMPLETE KIT
THIS THING IS FINALLY AVAILABLE! when printed this kit is one the best looking builds out there. This is our LIMITED edition FREEDOM-3D 19 complete build kit. This kit has all the parts needed to assemble a build. This kit comes with a complete OEM upper with rear serrations, OEM GLOCK sights, and OEM eternals and recoil spring. The kit comes with our OEM lower parts kit and all the rails ,pins and locking blocks needed for THE FREEDOM-3D 19 FRAME.
$625.00$413.003D-43 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G43 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON . The micro SD has A 43 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G43 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.003D-SPRINGFIELD XD 9 Subcompact build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM SUBCOMPACT in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE , NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776, MODIFIED , PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY/458 SOCOM FILE. The micro SD has A SPRINGFIELD SUBCOMPACT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS complimentary with the kit.
$500.00
$890.003D-GLOCKNOVSKY 19 COMPLETE KIT
Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF IPS FILE. The micro SD has A Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE
$890.003D-SPRINGFIELD XD 9 FULL SIZE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM FULL SIZE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE ,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY?/458 SOCOM FILE. The micro SD has A SPRINGFIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.003D-HI-point complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a HI-POINT in your home. (BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/CTRL -PEW FILE. The micro SD has A HI-POINT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$210.007″ Complete Ar-15 3D Printed Kit
This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own AR-15 chambered in 5.56 ! Cheap ,controllable ,and most importantly AVAILABLE. The 5.56 is a great round to have in an AR-15 platform. The lower receiver and buffer tube system is identical to that of any 5.56 or .223 AR-15platform, this means you can swap any AR15 platform upper receiver onto this build, the best of both worlds in one!!! The lower receiver contained on this sd card uses NO HARDWARE…..I REPEAT,NO HARDWARE!!!! The SD card contains two files a raw STL file for modification ,AND A PRIINT READY GCODE THAT IS READY TO GO!!! just preheat ,auto hone, and print!
$480.00$413.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$2,600.00Ghost gunner 3 CNC machine
NO WAIT! ORDERS SHIP NEXT DAY.
Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality.
The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, Polymer 80 and AK-47 lowers and frames. All existing jigs are compatible with GG3.
$2,600.00
$500.003D-17 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$500.003D-26 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
from: $25.001776 Headshot coffee
This is 1776 supply co.’s Headshot Ground coffee.1776 supply co. worked tirelessly to bring you one of the best tasting,HIGH caffeine coffee’s available. This coffee is very strong, both in flavor and caffeine,And is Richly chocolatey in the best Robusta tradition. Excellent with milk and sugar, or sweetened with condensed milk, it is also very low in acid so can be drank black even by individuals who are sensitive to acidity. Headshot is high in body and crema and makes a fabulous espresso. Our coffee is roasted , ground and packaged here at 1776 supply co. with the care and quality control that we put to our gun builds and parts. When you place an order for a bag of our coffee its prepared and ground then, NOT BEFORE! This insures a quality and freshness that you would expect from us,and a small batch coffee.
from: $25.00
from: $15.001776 Blend coffee
This is 1776 supply co.’s medium roast ,1776 blend Ground coffee.1776 supply co. worked tirelessly to bring you one of the best tasting coffee’s available. Made from a blend of Columbian Arabica beans,and high caffeine Robusta, this coffee has a floral aroma with a nutty,sweet winey taste,as well as a rich chocolatey taste that’s hard not to love. Excellent with milk and sugar, or sweetened with condensed milk, it is also very low in acid so can be drank black even by individuals who are sensitive to acidity.The medium roast is Full bodied,and has a smooth finish. Our coffee is roasted , ground and packaged here at 1776 supply co. with the care and quality control that we put to our gun builds and parts. When you place an order for a bag of our coffee its prepared and ground then, NOT BEFORE! This insures a quality and freshness that you would expect from us,and a small batch coffee.
from: $15.00 from: $25.001776 Headshot coffee
This is 1776 supply co.’s Headshot Ground coffee.1776 supply co. worked tirelessly to bring you one of the best tasting,HIGH caffeine coffee’s available. This coffee is very strong, both in flavor and caffeine,And is Richly chocolatey in the best Robusta tradition. Excellent with milk and sugar, or sweetened with condensed milk, it is also very low in acid so can be drank black even by individuals who are sensitive to acidity. Headshot is high in body and crema and makes a fabulous espresso. Our coffee is roasted , ground and packaged here at 1776 supply co. with the care and quality control that we put to our gun builds and parts. When you place an order for a bag of our coffee its prepared and ground then, NOT BEFORE! This insures a quality and freshness that you would expect from us,and a small batch coffee.
from: $25.00
from: $15.001776 Ground medium roast coffee
This is 1776 supply co.’s medium roast Ground coffee.1776 supply co. worked tirelessly to bring you one of the best tasting coffee’s available. Made from 100% columbian Arabica beans,this coffee has a floral aroma with a nutty,sweet winey taste that’s hard not to love.The medium roast is Full bodied,and has a smooth finish. Our coffee is roasted , ground and packaged here at 1776 supply co. with the care and quality control that we put to our gun builds and parts. When you place an order for a bag of our coffee its prepared and ground then, NOT BEFORE! This insures a quality and freshness that you would expect from us,and a small batch coffee.
from: $15.00
