3D PRINT

3D PRINT

Showing all 22 results

  • Micro SD – LOTUS print ready

    This is a reusable micro SD that is THE LOTUS AND IS  print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES  GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE LOTUS. The micro SD has A LOTUS file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own LOTUS at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    $20.00
  • Micro SD – Glocknofsky 19 print ready

    This is a reusable micro SD that is GLOCKNOFSKY 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES  GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE GLOCKNOFSKY 19. The micro SD has A NOFSKY file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own GLOCKNOFSKY 19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    $20.00
  • Micro SD – OBSIDIAN print ready

    This is a reusable micro SD that is obsidian print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the freedom co dev obsidian . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE freedom co dev obsidian. The micro SD has all obsidian files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own obsidian at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    $25.00
  • FREEDOM MAC UPPER KIT

    This is a complete hardware kit for your printed freedom mac printed upper. The upper that is produced with this  hardware kit is compatible and interchangeable with all the mac 11 projects that were released by freedom co dev team. As of now there are 11 mac designs that utilize the printed upper and take away the need to find a metal mac-11 upper for your builds.

    Category: Tags: , , , , , Product ID: 29686
    $80.00
  • THE LOTUS COMPLETE BUILD KIT 3D

    Its finally here!!! This is a a complete 3d printed build kit for the lotus 3d build kit!! this is  a limited run and we are only goin  to do a certain amount of these as complete build kits. you will be able to build lotuses in the future ,but will have to source pieces separately. This  build is absolutely awesome!! the printed upper and lower makes this build possible for more people. A futuristic mac 11 look, paired with how easy a build it is makes this an amazing build for anyone to get into. Get yours today before their gone!!

    $450.00
  • THE STAKK-X by Krrawn

    This thing is finally available!!! BUT NOT FOR LONG!!!!! This is a complete 3d build kit for the STAKK.-X 9mm.THis is a limited run and will not be available for long, This build was designed from the ground up with perfection and performance in mind. Designed by an avid figure in our community. KRRAWN with a little help from 1776 brought one the most amazing builds to date to reality. Every millimeter of this build was carefully designed and is unique. From the precise texture, the thick stable size of the grip, the flared magwell, the lightning cuts, the RMR cuts, even the color choice of stainless slide  black frame and red accents. Every piece was meticulously crafted to created a 1 of a kind performance weapon design. Don’t miss out on this deal and opportunity to get your hands on a very limited build that everyone will be after. Each build comes with  a certificate of authenticity that is personally signed and wet stamp certifying ,and letting you know which number of this limited run you were lucky to receive. What are you waiting for? get your STAKK -x today.

    $500.00
  • Ubar lower Hardware kit

    This is the hardware kit necessary for all you builds that require an UBAR lower receiver. This hardware kit contains all the reinforcements and necessary bolts and plates to successfully your UBAR 3d print build.

    Category: Tags: , , Product ID: 24388
    $25.00
  • 22LR BARREL LINER 5″

    These are 5” 22lr barrel liners for for your proto barrel builds. Weather your are building a tubee-22 ,D5k,or sg-22 if you want to make your own proto barrel this is the liner you use.

    Category: Tags: , , Product ID: 24359
    $35.00
  • Micro SD – 17 print ready

    This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G17 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Categories: , Tags: , , , , Product ID: 24345
    $20.00
  • Micro SD – 26 print ready

    This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Categories: , Tags: , , , , Product ID: 24343
    $20.00
  • D5K print ready Micro SD

    This is a reusable micro sd that is D5K print ready. The micro sd has the D5K files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own D5K at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier ! Make sure your bed is level, and not to far or to close to the printing nozzle, a paper’s thickness works. Don’t forget your bed adhesion stick! The files on this Sd card are designed to work best with an ender 3V2 .while using pla+ max tough pla.

    Categories: , Tags: , , , , , , , Product ID: 23981
    $20.00
  • SG-22 print ready Micro sd

    This is a reusable micro sd that is SG-22 print ready. The micro sd has the sg-22 files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SSg-22 at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier

    Categories: , Tags: , , , , , , , Product ID: 23950
    $20.00
  • 19 print ready Micro sd

    This is a reusable micro SD that is 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Categories: , Tags: , , , , Product ID: 23937
    $20.00
  • brass replacement Nozzle 0.4

    Most 3D printers come with a brass nozzle and there’s a very good reason for it. Brass has great thermal conductive properties meaning it transfers heat from your heater block to nozzle to filament much more efficiently than other nozzle materials.Brass does however have it’s drawbacks which is why other nozzle materials have been introduced in the 3D printing field. Brass happens to be a relatively soft metal meaning if it scrapes the bed surface or you print with abrasive filament, it can wear down and damage your nozzles.A brass nozzle is usually fine when printing non-abrasive filament such as PLA and ABS without certain additives. When you have additives like glass, carbon fiber or metal particles it will increase it’s abrasiveness and be more likely to damage a brass nozzle.The damage that tends to happen is grooves and ridges on the inner part of the nozzle, closing off the nozzle hole, or increasing the diameter of the hole making it unusable- .Most people that 3D print are usually printing with PLA, ABS or similar materials that aren’t abrasive.In these cases, a good quality brass nozzle will do more than fine, although you could do with an upgrade compared to some of the factory brass nozzles you get with your 3D printer.

    Category: Tags: , , , , Product ID: 23931
    $6.00
  • Stainless Steel Nozzle 0.4

    This is the first upgrade you want to do to your 3d printing freedom machine. This stainless steel tip is perfect for a cleaner, more consistent print, as well as longevity for your builds. Stainless Steel is one of the other popular nozzle materials that you’ll see people using. It’s main benefit over the brass nozzles is it’s better wear-resistance. Stainless Steel nozzles are great at fighting against abrasive filaments and not getting worn down. The main unique property of stainless steel nozzles is their ability to prevent filament covering the nozzle, so it stays cleaner than most other nozzles. You can use Stainless Steel nozzles for basically any material. The other main benefits that Stainless Steel nozzles have over the other nozzles is it’s food-safe and medical-grade properties. It can safely be used in applications where food will be involved as it has been accepted by the FDA of being food-safe. Other nozzles don’t share this same benefit. That is it’s main use, it can print with abrasive materials but Hardened Steel is better suited to this.

    Category: Tags: , , , , Product ID: 23929
    $6.00
  • SG-22 / Tubee-22 Barrel and comp combo.

    The wait is over ! The answer to your SG-22 ,D5K and your Tubee-22 barrel debacle is here! These are barrel and comp combos that will drop right in to your new, or existing SG-22 or tubee-22 build. Designed specifically for your 22lr bolt conversion these kits are more reliable than any other option on the market, and more importantly AVAILABLE!!!!  Not to mention the barrel and comp combo give your build a great look that is sure to turn some heads. With stainless and black options ,you have a choice to either build a sleek black build, or install a barrel that matches your stainless bolt. What are you waiting for? lets finish that build!!

    SKU: N/A Category: Tags: , , , , , , , , Product ID: 23919
    from: $180.00
  • Polymaker Tough PLA Filament 1.75mm GREEN

    This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. And who doesn’t need a little green in their life?

    Category: Tags: , , , , , , , , Product ID: 23842
    $40.00
  • Polymaker Tough PLA Filament 1.75mm WHITE

    This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. and white…..always classy on a firearm.

    Category: Tags: , , , , , , , , Product ID: 23839
    $40.00
  • Hardened Steel Nozzle 0.4

    This is the first upgrade you want to do to your 3d printing freedom machine. This hardened steel tip is perfect for a cleaner, more consistent print, as well as longevity for your builds. This tip will help hold temperature more consistently without hotspots and with help you on the way for the best prints possible. A worn out nozzle will result in prints not wanting to stick to your printing board. Make sure you have hardened steel tips if you are printing with an abrasive filament. Hardened Steel nozzles are the next step up in wear-resistance compared to Stainless Steel nozzles.This is simple steel that has been specially treated to be extremely wear-resistant and can last users a year and beyond with heavy use. You definitely want to be using hardened steel nozzles when you plan to print with abrasive filament.

    Category: Tags: , , , , Product ID: 23835
    $10.00
  • Creality Ender Enclosure Fireproof and Dustproof for Ender 3V2/ Ender 3 pro

    This is your fireproof enclosure for the ender 3v2 and ender 3 pro. This enclosure is necessary for builds that  require ultra high strength nylon filament. This keeps the heat in and out for your high strength builds.

     

    Category: Tags: , , , Product ID: 23827
    $80.00
  • Polymaker Tough PLA Filament 1.75mm Black

    This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. And who doesn’t like the classic black look?

    Category: Tags: , , , , , , , , Product ID: 23824
    $40.00
  • CREALITY ENDER 3V2 3D PRINTER

    This is the Ender 3v2 creality 3D printer. This printer is perfect for all your 3d printed firearm needs. easy to use, quiet and most of all AFFORDABLE!!! This printer is a breeze to set up and plug in and you will be printing your own parts and recievers in no time. This is the new age of firearms builds…period. That polymer lower on your OEM Glock or 80% build?…..How about the polymer receiver on some  Ar-15s and HK’s? you can now print them ,cheaper and easier than ever before. No more paying $150 a frame for a polymer  80% Glock frame. Now print them at home for personal use .The new age of the firearm builder is here.G et your cyber punk on today!

    Category: Tags: , , , , Product ID: 23819
    $255.00
Minimum 4 characters