diy

diy

Showing all 24 results

  • Sale!

    TROJAN CUSTOM BBB

    $450.00

    TROJAN CUSTOM BBB

    Now this is a showstopper! This is a full size,.9MM cal full  PARTS that’s sure to get people’s attention.This  comes with everything to complete the job,frame,lower parts kit ,rails and complete upper.These kits are a breeze to finish,you can finish these in no time!! need a new project that isn’t the same old glocks everyone sees? Then this is the BAG for you.(Polymer 80  Jig & Tooling not included)

    Categories: , , , Tags: , , Product ID: 28617
    $450.00
  • Sale!

    TROJAN

    $450.00

    TROJAN

    Now this is a showstopper! This is a full size,.9MM cal full  PARTS that’s sure to get people’s attention.This  comes with everything to complete the job,frame,lower parts kit ,rails and complete upper.These kits are a breeze to finish,you can finish these in no time!! need a new project that isn’t the same old glocks everyone sees? Then this is the BAG for you.(Polymer 80  Jig & Tooling not included)

    Categories: , , , Tags: , , Product ID: 28613
    $450.00
  • Protected: IPS 1911 BUILD KIT.

    There is nothing like a 1911. Now you can build your very own 1911 in your home. These are 1911 tactical kits that come with awesome upgrades right out of the box! These kit come with a skeletonized adjustable trigger,skeletonized hammer,rubberized grips, Novak front and rear sights and a Dovetailed grip safety! What more could you ask for!

    $900.00
  • GOON/GEISLER PARTS RELEASE

    THIS IS A SPECIAL PARTS SALE RELEASE FOR DIY BUILDERS.THIS BUNDLE  COMES WITH A WINDOWED CUSTOM  UPPER,A FLUTED CROWNED,STAINLESS,METAL FIBER OPTIC SIGHTS,AND A TRUSHOT LOWER PARTS KIT.THIS IS A GREAT AFFORADBLE, CUSTOM WAY TO FINISH OFF YOUR FRAME BUILDS.THESE WILL NOT LAST LONG,IF YOU GOT A FRAME THIS IS BY FAR THE BEST OPTION TO FINISH IT.

    Category: Tags: , , , Product ID: 28049
    $300.00
  • G43 Rail Kit For The PF940SS SLIM FRAME

    These are the polymer 80 rails for your g43 frames. The PF940SS SINGLE STACK frames .

    Categories: , Tags: , , , , Product ID: 27613
    $54.00
  • limited edition OBSIDIAN COMPLETE BUILD KIT.

    (EARLY RELEASE) the moment you al have been waiting for is here! project obsidian is now available to all to be built in your very own home! The freedom company dev team worked tirelessly to design and bring to one of the coolest designs nd builds guncad has ever seen. Project obsidian is a 9mm PDW that takes some of the most common parts around. Ar-15 triggers of any kind can be dropped into project obsidian. The PDW takes Glock mags, so any Glock mags you  have laying around are compatible with this build. This kit COMES WITH EVERYTHING NEEDED TO COMPLETE THE KIT INCLUDING THE FILES!! These first limited edition releases of the obsidian come with extras from the dev team as well as certificates to show these are the first obsidians to be built by the public. The Limited edition release kits also comes with item ONLY FOUND IN THE LIMITED RELEASE!! buyers are also getting early access to the obsidian files before pubic release

    $425.00
  • G26 Rail Kit For The Compact PF940sc

    These are the polymer 80 rails for your g26 frames. The PF940sc frames .

    Categories: , Tags: , , , , Product ID: 27472
    $54.00
  • G17 Rail Kit For The Compact PF940v2

    These are the polymer 80 rails for your g17 frames. The PF940v2 frames .

    Categories: , Tags: , , , , Product ID: 27470
    $54.00
  • G19 Rail Kit For The Compact PF940CV/PFC

    These are the polymer 80 rails for your g19 frames. The PF940c frames .

    Categories: , Tags: , , , , Product ID: 27468
    $54.00
  • GHOST RECON – 7″ AR BUILD KIT

    GHOST RECON BUILD KIT IS AVAILABLE WITH A CUSTOM COMP A& AMBI CHARGING HANDLE!

    Oh yes , build it and flaunt it. make your friends jealous.

    (Jig and tooling not included)

    $450.00
  • GHOST RECON-16″ AR BUILD KIT

    GHOST RECON BUILD KIT IS AVAILABLE WITH A CUSTOM COMP A& AMBI CHARGING HANDLE!

    Oh yes , build it and flaunt it. make your friends jealous.

    (Jig and tooling not included)

    $545.00
  • 3D-GLOCKNOVSKY 19 COMPLETE KIT

    Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE  . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE  OF IPS FILEThe micro SD has A  Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE

    $890.00
  • 7″ Complete Ar-15 3D Printed Kit

    This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own AR-15 chambered in 5.56 ! Cheap ,controllable ,and most importantly AVAILABLE. The 5.56 is a great round to have in an AR-15 platform. The lower receiver and buffer tube system is identical to that of any 5.56 or .223 AR-15platform, this means you can swap any AR15 platform upper receiver onto this build, the best of both worlds in one!!! The lower receiver contained on this sd card uses NO HARDWARE…..I REPEAT,NO HARDWARE!!!!  The SD card contains two files a raw STL file for modification ,AND A PRIINT READY GCODE THAT IS READY TO GO!!! just preheat ,auto hone, and print!

    $480.00
  • 16″ Complete Ar-15 3D Printed Kit

    This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own AR-15 chambered in 5.56 ! Cheap ,controllable ,and most importantly AVAILABLE. The 5.56 is a great round to have in an AR-15 platform. The lower receiver and buffer tube system is identical to that of any 5.56 or .223 AR-15platform, this means you can swap any AR15 platform upper receiver onto this build, the best of both worlds in one!!! The lower receiver contained on this sd card uses NO HARDWARE…..I REPEAT,NO HARDWARE!!!!  The SD card contains two files a raw STL file for modification ,AND A PRIINT READY GCODE THAT IS READY TO GO!!! just preheat ,auto hone, and print!

    $480.00
  • Sig “DEADRINGER'” 320 kit NO JIG

    If your in the market for a badass ,Sig p320,this is the kit for you!! This sig p320 comes with everything a sig p320 needs .This sig p320 has ALL the upgrades, ported custom slide, RMR cut, upgraded stainless steel guide rod, stainless barrel, flat faced competition trigger, upgraded fiber optic sights, and an x carry grip! all that and throw in slick range bag and you got one hell of a set up. If your gunna build a sig…why build a run of the mill one? build your new competition tier sig today!!

     

    $750.00
  • 16″ BATTLEREADY BUILD KIT BLACK

    This 16″ Battleready Build kit provides all parts need to complete an AR 15 build at home. We fabricate and test each upper for quality you can trust. Once you fabricate the 80% receiver, all parts are now packaged and ready to make your lower assembly as simple as possible.

    (Jig and tooling not included)

    $480.00
  • Ghost gunner 3 CNC machine

    NO WAIT! ORDERS SHIP NEXT DAY.

    Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity,  drastically improving finished part quality.

    The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15AR-308M1911Polymer 80 and AK-47 lowers and frames. All existing jigs are compatible with GG3.

    $2,600.00
  • Micro SD – 17 print ready

    This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G17 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Category: Tags: , , , , Product ID: 24345
    $20.00
  • Micro SD – 26 print ready

    This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Category: Tags: , , , , Product ID: 24343
    $20.00
  • D5K print ready Micro SD

    This is a reusable micro sd that is D5K print ready. The micro sd has the D5K files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own D5K at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier ! Make sure your bed is level, and not to far or to close to the printing nozzle, a paper’s thickness works. Don’t forget your bed adhesion stick! The files on this Sd card are designed to work best with an ender 3V2 .while using pla+ max tough pla.

    Category: Tags: , , , , , , , Product ID: 23981
    $20.00
  • SG-22 print ready Micro sd

    This is a reusable micro sd that is SG-22 print ready. The micro sd has the sg-22 files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SSg-22 at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier

    Category: Tags: , , , , , , , Product ID: 23950
    $20.00
  • 19 print ready Micro sd

    This is a reusable micro SD that is 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE  OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .

    Category: Tags: , , , , Product ID: 23937
    $20.00
  • WARRIOR 16 BLACK

    Start building your dream Ar-15 Today!

    (Jig and tooling not included)

    $600.00
  • 1911 BUILD KIT blk/blk

    There is nothing like a 1911. Now you can build your very own 1911 in your home. These are 1911 tactical kits that come with awesome upgrades right out of the box! These kit come with a skeletonized adjustable trigger,skeletonized hammer,rubberized grips, Novak front and rear sights and a Dovetailed grip safety! What more could you ask for!

    Categories: , Tags: , , , , , Product ID: 22844
    $600.00
Minimum 4 characters