firearm
Showing all 22 results
-
$400.00$670.00
OEM GLOCK 21 PARTS KIT
if you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and oem case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$670.00$625.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$625.00$625.00FREEDOM 19X 3D COMPLETE KIT
THIS THING IS FINALLY AVAILABLE! when printed this kit is one the best looking builds out there. This is our LIMITED edition FREEDOM-3D 19 complete build kit. This kit has all the parts needed to assemble a build. This kit comes with a complete OEM upper with rear serrations, OEM GLOCK sights, and OEM eternals and recoil spring. The kit comes with our OEM lower parts kit and all the rails ,pins and locking blocks needed for THE FREEDOM-3D 19 FRAME.
$625.00$413.003D-43 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G43 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON . The micro SD has A 43 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G43 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.003D-SPRINGFIELD XD 9 Subcompact build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM SUBCOMPACT in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE , NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776, MODIFIED , PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY/458 SOCOM FILE. The micro SD has A SPRINGFIELD SUBCOMPACT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS complimentary with the kit.
$500.00
$890.003D-GLOCKNOVSKY 19 COMPLETE KIT
Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF IPS FILE. The micro SD has A Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE
$890.003D-SPRINGFIELD XD 9 FULL SIZE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM FULL SIZE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE ,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY?/458 SOCOM FILE. The micro SD has A SPRINGFIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.003D-SHIELD 9MM build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SHIELD 9MM in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A SHIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SHIELD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$550.00
$450.003D-SD9VE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SD9VE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/TYRANIICALTY FILE. The micro SD has A SD9VE file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SD9VE at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$450.003D-HI-point complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a HI-POINT in your home. (BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/CTRL -PEW FILE. The micro SD has A HI-POINT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$210.003D-G3 complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G3 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS, NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G3 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$375.003D-G2C complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G2C in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G2C file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G2C at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick . https://www.youtube.com/watch?v=V11vW50Cv9s&t=40s
$325.00$413.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$2,600.00Ghost gunner 3 CNC machine
NO WAIT! ORDERS SHIP NEXT DAY.
Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality.
The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, Polymer 80 and AK-47 lowers and frames. All existing jigs are compatible with GG3.
$2,600.00
$25.0025 rnd 22lr magazine.
This is a 10 rnd magazine for all of our 22 lr builds. This mag will work for the D5K, the Goldblum, The SG-22, the scally wag, And any 22lr kit with the conversion bolt.
- WILL NOT SHIP TO STATES WITH CAPACITY BANS IN EFFECT.
$25.00
$25.0010 rnd 22lr magazine.
This is a 10 rnd magazine for all of our 22 lr builds. This mag will work for the D5K, the Goldblum, The SG-22, the scally wag, And any 22lr kit with the conversion bolt.
$25.00
$500.003D-17 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$500.003D-26 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$650.00D5K COMPLETE STATIC BOX
The new 3d printed d5k kits are here!! This complete kits kit comes with everything needed to print, and complete a D5K in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with The D5K and all modifications already made for a successful print, Just insert the card, and hit print. No need to make any modifications to the file. This box takes 3d print firearms building and puts in in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. The D5K is a semi-automatic, mag fed 22-LR.The files contained are designed and adjusted to be worked with a Ender 3v2 (which we sell),and is designed to work with the Polymaker PLA max ,tough pla. We recommend autohoning ,and preheating before every print.
$650.00
