G19
Showing all 14 results
-
Trevizo 19 BUILD KIT
This kit is perfect those that want to 3d print a g19 ,but already have a complete upper. This kit was inspired by a customer ,and has everything you need minus the upper. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$200.00G17 Replacement barrel stainless
Our Match-Grade Barrel for the Glock® 17 fits ALL generations of G17, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$56.00G17 Replacement barrel blk
Our Match-Grade Barrel for the Glock® 17 fits ALL generations of G17, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$56.00G19 Replacement barrel
Our Match-Grade Barrel for the Glock® 19 fits ALL generations of G26, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00$56.00G26 Replacement barrel .
Our Match-Grade Barrel for the Glock® 19 fits ALL generations of G26, Gen1 through Gen5. It’s an excellent replacement for a shot-out factory barrel or for completing a pistol based on the G26 platform. And it’s the ideal tube for a custom gun built on a Polymer80 frame with a RMR Slide on top!
Each Match-Grade Barrel for Glock® 26 is machined from hardened 416R stainless steel to precise dimensions, so it’s a drop-in fit on most guns. The tight lockup helps ensure superb accuracy, too. The extra-hard Black Nitride finish resists surface wear and stops in its tracks whatever corrosion might try to challenge the stainless steel. This 9mm Luger (9x19mm) chambered barrel is button-rifled with standard, 1-10″ right-hand, 6-groove rifling that is compatible with “practice” ammo with non-jacketed bullets.
$56.00lower parts kit for Glock 26 After market
This is our trusted aftermarket lower parts kit for Glock 26. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00lower parts kit for Glock 17 After market
This is our trusted aftermarket lower parts kit for Glock 17. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00lower parts kit for Glock 19 After market
This is our trusted aftermarket lower parts kit for Glock 19. This is our well known lower parts kit that has no issues like other aftermarket lower parts kits are known to have. We stand by these lower parts kits, and have had amazing success with them in the community. If you were looking for an reliable , affordable lower parts kit….look no further. Get your today? They sell out fast.
$55.00$625.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$625.00$625.00FREEDOM 19X 3D COMPLETE KIT
THIS THING IS FINALLY AVAILABLE! when printed this kit is one the best looking builds out there. This is our LIMITED edition FREEDOM-3D 19 complete build kit. This kit has all the parts needed to assemble a build. This kit comes with a complete OEM upper with rear serrations, OEM GLOCK sights, and OEM eternals and recoil spring. The kit comes with our OEM lower parts kit and all the rails ,pins and locking blocks needed for THE FREEDOM-3D 19 FRAME.
$625.00
$890.003D-GLOCKNOVSKY 19 COMPLETE KIT
Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF IPS FILE. The micro SD has A Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE
$890.00$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$20.0019 print ready Micro sd
This is a reusable micro SD that is 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00$280.00MCK for Polymer 80 (Black)
The next generation of Micro Roni is here! We improved our past generation models into the ultimate conversion kit. It’s Micro Roni Generation 4, and we call it Micro Conversion Kit, or simply MCK. This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. It is greatly improved from previous generations of the Micro Roni Stabilizer. Available for select Gen 3, 4, and 5 Glock models. The extended stabilizer, which now comes standard, enables one-handed firing for better shooting performance. It also comes with a Velcro® strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards. THIS IS THE STRIPPED DOWN VERSION THAT COMES WITH FLIP UP SIGHTS.CHECK OUT OUR “SECRET SERVICE ” EDITION THAT COMES WITH FLIP UPS,OPTIC,FLASHLIGHT, AND THUMB RESTS!!!
$280.00
