gun
Showing all 16 results
-
$400.00$670.00
OEM GLOCK 21 PARTS KIT
if you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and oem case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$670.00$625.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
$625.00$625.00FREEDOM 19X 3D COMPLETE KIT
THIS THING IS FINALLY AVAILABLE! when printed this kit is one the best looking builds out there. This is our LIMITED edition FREEDOM-3D 19 complete build kit. This kit has all the parts needed to assemble a build. This kit comes with a complete OEM upper with rear serrations, OEM GLOCK sights, and OEM eternals and recoil spring. The kit comes with our OEM lower parts kit and all the rails ,pins and locking blocks needed for THE FREEDOM-3D 19 FRAME.
$625.00$413.003D-43 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G43 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON . The micro SD has A 43 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G43 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.003D-SPRINGFIELD XD 9 Subcompact build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM SUBCOMPACT in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE , NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776, MODIFIED , PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY/458 SOCOM FILE. The micro SD has A SPRINGFIELD SUBCOMPACT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS complimentary with the kit.
$500.00
$890.003D-GLOCKNOVSKY 19 COMPLETE KIT
Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF IPS FILE. The micro SD has A Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE
$890.003D-SPRINGFIELD XD 9 FULL SIZE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM FULL SIZE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE ,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY?/458 SOCOM FILE. The micro SD has A SPRINGFIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00$413.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$413.00
$500.003D-17 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00
$500.003D-26 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$500.00Polymaker Tough PLA Filament 1.75mm GREEN
This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. And who doesn’t need a little green in their life?
$40.00Polymaker Tough PLA Filament 1.75mm WHITE
This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. and white…..always classy on a firearm.
$40.00Polymaker Tough PLA Filament 1.75mm Black
This is the polymaker plus TOUGH fillament for your next Build.This is not your standard polymaker filament, this is much more dense and durable.However making out of your machine or an encloser is not necessary to run this durable 1.75 mm filament. And who doesn’t like the classic black look?
$40.00
