kit
Showing 1–25 of 28 results
-
Trevizo 19 BUILD KIT
This kit is perfect those that want to 3d print a g19 ,but already have a complete upper. This kit was inspired by a customer ,and has everything you need minus the upper. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 19, 3D, 3D PRINT, 3d print kit, Build, Build kit, build kit for trevizo, chairman, chairmanwon, complete, complete kit, copyable, ENDER, Ender 3, endr 3 v2, Frame, frame set, freedom, freedom co dev team, front, full build, G19, gcode, Glock, glock 19, glock19, kit, Lower parts kit, lpk, micro, pla, polyactic acid, polymaker, printed, printer, rail, s pins, sd, STL, strong, tough, trevizo, twisty gripppy, unregistered Product ID: 30063$260.00$200.00THE JAKLE BUILD 80% BUILD KIT
We are proud to announce the long-awaited release of the JAKL build kit ! This platform is built around a 6105 monolithic upper receiver designed to be compatible with our Mil-Spec AR-15 lower receiver. The JAKL offers a buffer system that is fully captured in the upper receiver, shortening the overall length of the firearm. Completed with a rear Picatinny stock adapter, which allows for a side-folding brace,or any brace system / accessories to be attached to be securely attached to the firearm. The JAKL features a long-stroke piston design with a Carpenter 158 bolt and 4340 carrier that are an AK/AR hybrid. The side charging handle is ambidextrous, allowing the user to change positions to the left or right side of the receiver without the use of tools. Equipped with a tool-less 4-position gas block, this feature offers the ability to quickly adjust your gas block by hand when needed. Field stripping and removal of the JAKL carrier, recoil assembly, and sled assembly can all be done without tools for effortless cleaning. THIS KIT COMES WITH EVERYTHING NEEDED TO BUILD A BUFFERLESS, PISTON DRIVEN , 5.56 RIFLE ON YOUR OWN. This RIFLE KIT IS AMAZING, AND GIVES YOU THE ABILITY TO BUILD A RIFLE COMPARABLE TO OTHER $3000 PLATFORM FOR A THIRD OF THE COST.SLEEK RELIABLE ,AND EFFECIENT THIS RIFLE CAN EVEN FIRE WHILE FOLDED,ALL WHILE BEING AN AR-15 PLATFORM RFLE THAT WHILL TAKE MOST AR-15 ACCESSORIES.
Categories: Built Rifle Uppers, Firearm Conversions, Rifle Build Kits Tags: 1776, 1776 SUPPLY, AR15, Build, Build kit, build your own, COMPLET BUILD, COMPLETE PARTS, diy, EVERYTHING, GHOST, ghost guns, kit, parts, serialess Product ID: 30049$1,100.00Freedom Mac Trunnions
This is a set of trunnions for all freedom co dev team 3d print builds that have a printed upper. No longer do you have to search endlessly for a complete mac upper to finish your builds. Now just print and build them!!!
Category: Hardware Kits Tags: 11, 3D, 3d build, Build, dark, darkened, dev, diy, for 3d print build, for build kits, for complete, for complete build kits, for printed parts, for printed uppers, for upper, freedom, freedom co dev team, front, hardware, hardware kit, iron, kit, kits, mac, mac-11, mac11, metal, part, parts, parts for mac, parts for mac 11, rear, set, sets, trunnion, trunnion set for freedom mac builds, trunnions, Upper Product ID: 29690$80.00$50.00FREEDOM MAC UPPER KIT
This is a complete hardware kit for your printed freedom mac printed upper. The upper that is produced with this hardware kit is compatible and interchangeable with all the mac 11 projects that were released by freedom co dev team. As of now there are 11 mac designs that utilize the printed upper and take away the need to find a metal mac-11 upper for your builds.
Category: Hardware Kits Tags: 11, 1776, 3D, 3D PRINT, all thread, Build, design, diy, freedom, freedom mac, front trunnion, hardware, kit, kits, locking nuts, m3, m3 locking nuts, mac, mac with m3 all thread, mac-11, mac11, metal, nut, nuts, print, printed, printed upper, printer, proprietary, rear trunnion, threading, threads, trunnion set, Upper Product ID: 29686$80.00Goon parts bundle
Category: 3D Printing Tags: 1776, 2, 3D, 3d printing, barrel, black, Build, Build kit, bundle, crowned, dark, deal, firearm, fluted, goon, gun, iron, kit, lip, lower parts, Lower parts kit, lpk, lpks, metal, milkman, part, parts, parts for goon kit, parts for gun kit, print, rook, slide, two, Upper Product ID: 29330$1,300.00$400.00THE REVENANT COMPLETE 80% Kit
This is one of the coolest 80% build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture your own revenant chambered in 9mm! The revenant is a bi product of the dev collab 2022.Many great great minds from all over the country came together to bring you an amazing pdw. The revenant is 9mm, ump like PDW that looks and operates like a $3000 operating system. Everyone has been waiting for it and they are finally here.
SKU: N/A Categories: 3D Printing, Rifle Parts Tags: .223, 15, 1776, 3D, 3D PRINT, 3d printed, 556, 80% for the revenant, 80% kit, 80% lower, 80% revenant, 80% revenant kit, 9, 9mm, aluminum, ar, AR-15, AR15, box, Build kit, complete, cura, dev, diy, files, freedom co, freedom co dev team, gcode, glock mag adapter, glock magazine adapter, how to build a revenant, kit, Lower parts kit, lpk, MAG, magazine, magazine adapter, make a revenant, memory, micro, micro sd card, montego, p80, package, parts to build a revenant, pistol, pistol brace, printed, printer, reciever, rifle, sd, SD card, sidewinder side folder, STL, ump, ump-45 Product ID: 29194from: $875.00OEM GLOCK 21 PARTS KIT
if you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and oem case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
Category: 3D Printing Tags: 1776, 21, 9mm, authentic, barrel, Build, Build kit, case, complete, complete kit, diy, durable, easy, firearm, Frame, front, full build, g21, glock case, Glock parts kit, glock parts with case, gun, Handgun, how to make a g21, kit, lower, lpk, modifiable, OEM, oem glock parts for sale, original, original equipment manufacturer, original glock, parts, parts for g21, parts kit, rails, ready, real, rear, recoil, spring, unregistered, upk, Upper, where to get g21 parts Product ID: 28756$700.00$670.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
Categories: 3D Printing, RECEIVER BLANKS Tags: 1776, 19, 9mm, authentic, barrel, Build, Build kit, case, complete, complete kit, diy, durable, easy, firearm, Frame, front, full build, G19, glock case, Glock parts kit, glock parts with case, gun, Handgun, how to make a g19, kit, lower, lpk, modifiable, OEM, oem glock parts for sale, original, original equipment manufacturer, original glock, parts, parts for g19, parts kit, rails, ready, real, rear, recoil, spring, unregistered, upk, Upper, where to get g19 parts Product ID: 28754$700.00$625.00THE REVENANT COMPLETE 3D Printed Kit
This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own revenant chambered in 9mm! The revenant is a bi product of the dev collab 2022.Many great great minds from all over the country came together to bring you an amazing pdw. The revenant is 9mm, ump like PDW that looks and operates like a $3000 operating system. Everyone has been waiting for it and they are finally here.
Categories: 3D Printed COMPLETE Kits, 3D Printing, Freedom Co. Dev Team Tags: .223, 3D, 3D PRINT, 3d printed, 556, 80% lower, 9, 9mm, ar, AR15, assemble brace, box, brac, Build, Build kit, complete, complete kit for revenant, complete upper, cura, dev, diopter sights, diy, Ender 3, Ender 3V2, file, freedom co, freedom co dev team, full build, gcode, handstop, kit, lower, Lower parts kit, lpk, montego, p80, package, pistol, pla, polymaker, pre built, print without computer, printed, printer, revenant, revenant files, revenant files download, revenant for sale, revenant store, rifle, SD card, STL, the revenant, the revenant download, ump, ump-45 Product ID: 28694$800.00$750.003D-SHIELD 9MM build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SHIELD 9MM in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A SHIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SHIELD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 2x, 3D, 3d print kit, 3d-shield 3d print kit, 8 rnd, 9mm, barrel, brand new, Build, Build kit, complete, complete kit, copyable, creality, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, files for shield, firearm, Frame, FREE, freeman, front, full build, gcode, Handgun, how to make a 3d shield, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, shield, shield slide, slide for shield, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk Product ID: 26344$550.003D-SD9VE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SD9VE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/TYRANIICALTY FILE. The micro SD has A SD9VE file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SD9VE at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 10rnd, 2x, 3D, 3d print kit, 3d-sdv9e 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, freeman sd9ve build, freemantyrannicality, front, full build, gcode, Handgun, how to make a 3d sd9ve, how to print s&w, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, s&w, sd9, sd9v, sd9ve, smith, smith & wesson, smith and wesson upper, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, tyranicality, unregistered, unregistered 1776, upk, wesson, where to get files for sdve9, where to get sd9ve, without computer Product ID: 26329$450.003D-HI-point complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a HI-POINT in your home. (BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/CTRL -PEW FILE. The micro SD has A HI-POINT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 10rnd, 1776, 2x, 3D, 3d print kit, 3d-hipoint, 9mm, barrel, brand new, Build, Build kit, complete, complete kit, copyable, creality, ctrl, ctrl pew, ctrlpew, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, files for hi point, firearm, Frame, FREE, freeman, front, full build, gcode, GHOST, ghost ring, Handgun, hi, hi point, hi point 9, hipoint, hipoint slide, how to build taurus, how to make a 3d shield, kit, lower, lpk, MAG, magazine, man, modifiable, parts, parts kit, pew, pla, point, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, ring, shield, sights, slide for hipoint, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, trigger lock, unregistered, upk Product ID: 26307$210.003D-G3 complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G3 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS, NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G3 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 2x, 3D, 3d print kit, 3d-g3 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, front, full build, g3, gcode, Handgun, how to make a g3, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk, Upper Product ID: 25880$375.003D-G2C complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G2C in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G2C file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G2C at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick . https://www.youtube.com/watch?v=V11vW50Cv9s&t=40s
Categories: 3D Printing, Built Rifle Uppers Tags: 2c, 3D, 3d print kit, 3d-g2c 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, front, full build, g2C, gcode, Handgun, how to make a g2c, kit, lower, lpk, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk, Upper Product ID: 25874$375.00$325.007″ Complete Ar-15 3D Printed Kit
This is one of the coolest 3d build kits ever designed , and put together! This build kit comes with all the parts needed to manufacture or print your own AR-15 chambered in 5.56 ! Cheap ,controllable ,and most importantly AVAILABLE. The 5.56 is a great round to have in an AR-15 platform. The lower receiver and buffer tube system is identical to that of any 5.56 or .223 AR-15platform, this means you can swap any AR15 platform upper receiver onto this build, the best of both worlds in one!!! The lower receiver contained on this sd card uses NO HARDWARE…..I REPEAT,NO HARDWARE!!!! The SD card contains two files a raw STL file for modification ,AND A PRIINT READY GCODE THAT IS READY TO GO!!! just preheat ,auto hone, and print!
Categories: 3D Printing, Rifle Parts Tags: .223, 1776, 3D, 3d ar15 kit, 3d printed Ar-15, 556, 7", 80 % ar, 80 percent, 80 percent frame, 80 percent lower reciever, 80%, 80% kit, 80% lower, ar, ar 3d kit, ar complete 3d, ar gcode, AR kit, ar stl, AR-15, AR15, ar15 no ffl, Build kit, complete ar 3d print, cura ar, diy, diy ar15, durable, elder, hardened, how to print a complete ar, how to print an ar, kit, matthew, matthew elder, no ffl, no hardware, p80, package, pistol, pla, polymaker, print, receiver, rifle, with dust cover, with files, with forward assist, with gas block, with gas tube, with sd card, with upper, working, working ar Product ID: 24931$550.00$480.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 26, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, g26, gcode, Glock, grippy, gun, Handgun, how to make a g26, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24904$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 17, 1776, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, G17, gcode, Glock, grippy, gun, Handgun, how to make a g17, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24798$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 19, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, G19, gcode, Glock, grippy, gun, Handgun, how to make a g19, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24796$413.00Ubar lower Hardware kit
This is the hardware kit necessary for all you builds that require an UBAR lower receiver. This hardware kit contains all the reinforcements and necessary bolts and plates to successfully your UBAR 3d print build.
Category: 3D Printing Tags: 3D PRINT, bolt, bolts, hardware, hardware for ubar, iron, ivan, ivan the troll, joint, kit, locking nuts, lower, lower receiver, metal, metal base plate, nut, nuts, pin, pin eye bolts, PINS, receiver, ring, rings, takedown pin, u joint, ubar, Upper Product ID: 24388$25.00D5K COMPLETE PARTS BOX
The new 3d printed kits are here!! This complete kits kit comes with everything needed to print, and complete a D5K in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with The D5K and all modifications already made for a successful print, Just insert the card and hit print. No need to make any modifications to the file.This box takes 3d print firearms building and puts in in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. The D5K is a semi-automatic, mag fed 22-LR.The files contained are designed and adjusted to be worked with a Ender 3v2 (which we sell),and is designed to work with the Polymaker PLA max ,tough pla.
Category: 3D Printing Tags: 10 rnd, 3D, 3d print kit, auto, barrel, Bcg, black, black 3d filament, booligan, Booligan Shooting Sports, Build, Build kit, charging, charging handle, Compensator, complete, complete kit, d-5-k, D5K, dark, darkened, durable, ENDER, Ender 3, Ender 3V2, filament, full build, gcode, goldblume, grip, grips, handle, how to build a d5k, kit, kits, micro sd, parts for d5k, pla, polylactic acid, polymaker, print, printed, printer, sd, SD card, semi, semi-automatic, STL, strength, strong, sub, unregistered, where to get parts for D5k Product ID: 24379$650.00SG-22 BARREL NUT
This is a 3d printed barrelnut for your Sg-22, scallywag, or any other build that takes the SG diameter barrel nut. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this barrel nut is a great way to finish up any 22lr build.
Category: 3D Printing Tags: 22lr, 3D, 3D PRINT, 3d printed, barrel, barrel nut, barrel nut with sg diameter, booligan, booligan shooting sport, Build, durable, for, for build kit, for kit, handguard, how to build sg22, kit, not for sg22, nut, paintable, parts for sg, pre-printed, print, printed, printer, sandable, scally, scally wag, scallywag, scallywag barrel nut, screw, sg, sg handguard, sg parts, sg-22, sg22, small, small diameter, smaller, SS-g, ssg, strong, threading, threads, wag, what barrel nut can fit a sg-22 Product ID: 24362$15.0022LR BARREL LINER 5″
These are 5” 22lr barrel liners for for your proto barrel builds. Weather your are building a tubee-22 ,D5k,or sg-22 if you want to make your own proto barrel this is the liner you use.
Category: 3D Printing Tags: .22, 1-12 twist rate, 22 long rifle, 22 lr, 22 mag, 22lr, 3D PRINT, 5", barrel, barrel liner, Build, button rifled, D5K, for 3d printed build, for D5k, for rifle, for sg-22, iron, kit, kits, liner, metal, rifle, sg-22, sg22, tubee, tubee-22, tubee22 Product ID: 24359$35.00D5k/Goldblum BARREL NUT
This is a 3d printed barrelnut for your D5K, goldblum, or any other build that takes the smaller diameter barrel nut. This is perfect to finish of your build, or if you don’t have time to print your own. Lightweight, ergonomic and very attractive, this barrel nut is a great way to finish up any 22lr build.
Category: 3D Printing Tags: 22lr, 3D, 3D PRINT, 3d printed, barrel, barrel nut, booligan, booligan shooting sport, Build, D5K, durable, for, for build kit, for kit, gold blume, Goldblume SS-G, handguard, kit, not for sg22, nut, paintable, pre-printed, print, printed, printer, sandable, screw, sg, sg handguard, small, small diameter, smaller, strong, threading, threads, what barrel nut can fit a SS-G Product ID: 24349$15.00D5K COMPLETE STATIC BOX
The new 3d printed d5k kits are here!! This complete kits kit comes with everything needed to print, and complete a D5K in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with The D5K and all modifications already made for a successful print, Just insert the card, and hit print. No need to make any modifications to the file. This box takes 3d print firearms building and puts in in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. The D5K is a semi-automatic, mag fed 22-LR.The files contained are designed and adjusted to be worked with a Ender 3v2 (which we sell),and is designed to work with the Polymaker PLA max ,tough pla. We recommend autohoning ,and preheating before every print.
Category: 3D Printing Tags: .22, 10, 10 rnd, 22 lr, 22lr, 3D, 3d print kit, barrel nut, Bcg, booligan, booliganshootingsports, box, box kit, Build, Build kit, bundle, cgarging handle, charging, compatible, complete, complete kit, creality, D5K, dust cover, ENDER, Ender 3, Ender 3V2, filament, firearm, firearms, Forward assist, full build, goldblume, grip, handguard, handle, hardened, kit, lr, mag fed, magazine, magfed, memory card, micro, micro sd, package, pla, polylactic acid, polymaker, polymax, print, printed, reciever, rnd, round, sd, semi, semi-automatic, stark, static, sub, tough, unregistered, Upper, with grip Product ID: 23975$650.00