print files without
Showing all 8 results
-
Micro SD – LOTUS print ready
This is a reusable micro SD that is THE LOTUS AND IS print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE LOTUS. The micro SD has A LOTUS file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own LOTUS at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00Micro SD – Glocknofsky 19 print ready
This is a reusable micro SD that is GLOCKNOFSKY 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the NOFSKY INDUSTRIES GLOCKNOFSKY 19. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE GLOCKNOFSKY 19. The micro SD has A NOFSKY file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own GLOCKNOFSKY 19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00Micro SD – OBSIDIAN print ready
This is a reusable micro SD that is obsidian print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the freedom co dev obsidian . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE freedom co dev obsidian. The micro SD has all obsidian files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own obsidian at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$25.00Micro SD – 17 print ready
This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G17 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00Micro SD – 26 print ready
This is a reusable micro SD that is 26 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A g26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00
$20.00D5K print ready Micro SD
This is a reusable micro sd that is D5K print ready. The micro sd has the D5K files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own D5K at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier ! Make sure your bed is level, and not to far or to close to the printing nozzle, a paper’s thickness works. Don’t forget your bed adhesion stick! The files on this Sd card are designed to work best with an ender 3V2 .while using pla+ max tough pla.
$20.00
$20.00SG-22 print ready Micro sd
This is a reusable micro sd that is SG-22 print ready. The micro sd has the sg-22 files loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SSg-22 at home. All the files have been adjusted and worked in cura already for the best results No need for a computer or to understand infill density, supports, mesh fixes, overhang blah ,blah blah, already done for you so you can get to the fun part faster and easier
$20.0019 print ready Micro sd
This is a reusable micro SD that is 19 print ready. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
$20.00
