upk
Showing all 19 results
-
1776 upper parts kit.
this is the upper parts kit that you all have been asking about. This is the well known slide parts kit that is known to the community to function great ,and to bring the best results for your builds. Tested, inspected, and warrantied by our company, these parts are the best of the best when it comes to to slide parts kits.
Categories: Glock Compatible Parts, Glock Slide Parts Tags: heat treated, kits, slide parts, upk, upper parts kit Product ID: 29717$80.00$65.00OEM GLOCK 21 PARTS KIT
if you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and oem case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
Category: 3D Printing Tags: 1776, 21, 9mm, authentic, barrel, Build, Build kit, case, complete, complete kit, diy, durable, easy, firearm, Frame, front, full build, g21, glock case, Glock parts kit, glock parts with case, gun, Handgun, how to make a g21, kit, lower, lpk, modifiable, OEM, oem glock parts for sale, original, original equipment manufacturer, original glock, parts, parts for g21, parts kit, rails, ready, real, rear, recoil, spring, unregistered, upk, Upper, where to get g21 parts Product ID: 28756$700.00$670.00OEM GLOCK 19 PARTS KIT
If you are looking for an oem parts kit for your build ,look no further! This kit comes with an complete oem upper, oem lower parts kit, oem mags, and owm case! oem parts in the build world are known to bring a hassle free reliable build ,no matter what lower you are printing ,milling, or ordering. Start your build the right way with Glock Perfection.
Categories: 3D Printing, RECEIVER BLANKS Tags: 1776, 19, 9mm, authentic, barrel, Build, Build kit, case, complete, complete kit, diy, durable, easy, firearm, Frame, front, full build, G19, glock case, Glock parts kit, glock parts with case, gun, Handgun, how to make a g19, kit, lower, lpk, modifiable, OEM, oem glock parts for sale, original, original equipment manufacturer, original glock, parts, parts for g19, parts kit, rails, ready, real, rear, recoil, spring, unregistered, upk, Upper, where to get g19 parts Product ID: 28754$700.00$625.00FREEDOM 19X 3D COMPLETE KIT
THIS THING IS FINALLY AVAILABLE! when printed this kit is one the best looking builds out there. This is our LIMITED edition FREEDOM-3D 19 complete build kit. This kit has all the parts needed to assemble a build. This kit comes with a complete OEM upper with rear serrations, OEM GLOCK sights, and OEM eternals and recoil spring. The kit comes with our OEM lower parts kit and all the rails ,pins and locking blocks needed for THE FREEDOM-3D 19 FRAME.
Categories: 3D Printed COMPLETE Kits, 3D Printing, RECEIVER BLANKS Tags: 1776, 1776 SUPPLY, 19, 19x, 3D, 3d print kit, 3d printer, 3D-19, 3D-19x, 3d-nineteen, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download glock, easiest way to make a glock, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, front, full build, g 19, g 19x, G19, g19x, gcode, Glock, glock 19, glock 19x, gun, how to build a, how to build a glock, how to print a glock, Lower parts kit, lpk, memory, micro sd, nineteen, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, STL, supply, tough pla, twisty grippy, unregistered, upk, Upper, upper parts kit, with filament, with sights, won Product ID: 28749$700.00$625.003D-43 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G43 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON . The micro SD has A 43 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G43 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 1776 SUPPLY, 3D, 3d print kit, 3d printer, 3D-43, 3d-forty three, 43, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download glock, easiest way to make a glock, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, forty three, Frame, front, full build, G 43, G43, gcode, Glock, glock 26, gun, how to build a, how to build a glock, how to print a glock, Lower parts kit, lpk, memory, micro sd, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, STL, supply, tough pla, twisty grippy, unregistered, upk, Upper, upper parts kit, with filament, with sights, won Product ID: 27507$413.003D-SPRINGFIELD XD 9 Subcompact build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM SUBCOMPACT in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE , NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776, MODIFIED , PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY/458 SOCOM FILE. The micro SD has A SPRINGFIELD SUBCOMPACT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS complimentary with the kit.
Category: 3D Printing Tags: 1776, 1776 SUPPLY, 26, 3D, 3d printer, 3d printxd9kit, 3D-26, 3d-twenty six, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download springfield, easiest way to make a springfield, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, free files, front, full build, full size, g2C, gcode, gun, how to build a, how to build a Springfield, how to print a Springfield, Lower parts kit, lpk, memory, micro sd, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, spring field, springfield, STL, subcompact, supply, TAURUS BUILD KIT, tough pla, unregistered, upk, Upper, upper parts kit, with filament, with sights, won, xd 9, xd9 Product ID: 26371$580.00$500.003D-GLOCKNOVSKY 19 COMPLETE KIT
Talk about a must have HAVE YOU SEEN THIS!?? This a must have for any builder that looking to stand out ,and have something that no-one else has. introducing the GLOCKNOVSKY!! This is exactly what it looks like a true DOUBLE GLOCK 19!!! This kit has everything you need to print, build and own you very own unique Glocknovsky.This build will take all oem glock parts and accessories.This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF IPS FILE. The micro SD has A Glocknovsky file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own meme gun at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .THE FILE IS FREE
Category: 3D Printing Tags: 1776, 1776 SUPPLY, 19, 3D, 3d print kit, 3d printer, 3D-19, 3d-glocknofsky, 3d-nineteen, 3d-nofsky, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download glock, easiest way to make a glock, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, front, full build, g 19, g-nofsky, G19, gcode, Glock, glock 19, glock nofsky, GLOCKNOFSKY, gnofsky, gun, how to build a, how to build a glock, how to print a glock, iprintshit, ips, Lower parts kit, lpk, memory, micro sd, nineteen, nofsky, nofsky industries, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, STL, supply, tough pla, twisty grippy, unregistered, upk, Upper, upper parts kit, with filament, with sights, won Product ID: 26349$890.003D-SPRINGFIELD XD 9 FULL SIZE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SPRINGFIELD XD 9MM FULL SIZE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,CASE ,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE AWCY?/458 SOCOM FILE. The micro SD has A SPRINGFIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SPRINGFIELD XD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 1776 SUPPLY, 26, 3D, 3d print kit, 3d printer, 458, 458 socom design, 9mm, awcy, box, Build, build a Springfield, Build kit, bundle, card, complete, complete kit, download, download springfield, easiest way to make a springfield, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, free files, front, full build, full size, g2C, gcode, gun, how to build a, how to build a Springfield, how to print a Springfield, Lower parts kit, lpk, memory, micro sd, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, socom, socom design, spring field, springfield, STL, supply, TAURUS BUILD KIT, tough pla, unregistered, upk, Upper, upper parts kit, with filament, with sights, xd 9, xd9 Product ID: 26345$580.00$500.003D-SHIELD 9MM build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SHIELD 9MM in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED, PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A SHIELD file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SHIELD at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 2x, 3D, 3d print kit, 3d-shield 3d print kit, 8 rnd, 9mm, barrel, brand new, Build, Build kit, complete, complete kit, copyable, creality, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, files for shield, firearm, Frame, FREE, freeman, front, full build, gcode, Handgun, how to make a 3d shield, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, shield, shield slide, slide for shield, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk Product ID: 26344$550.003D-SD9VE build kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a SD9VE in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/TYRANIICALTY FILE. The micro SD has A SD9VE file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own SD9VE at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 10rnd, 2x, 3D, 3d print kit, 3d-sdv9e 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, freeman sd9ve build, freemantyrannicality, front, full build, gcode, Handgun, how to make a 3d sd9ve, how to print s&w, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, s&w, sd9, sd9v, sd9ve, smith, smith & wesson, smith and wesson upper, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, tyranicality, unregistered, unregistered 1776, upk, wesson, where to get files for sdve9, where to get sd9ve, without computer Product ID: 26329$450.003D-HI-point complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a HI-POINT in your home. (BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN/CTRL -PEW FILE. The micro SD has A HI-POINT file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 10rnd, 1776, 2x, 3D, 3d print kit, 3d-hipoint, 9mm, barrel, brand new, Build, Build kit, complete, complete kit, copyable, creality, ctrl, ctrl pew, ctrlpew, custom upper, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, files for hi point, firearm, Frame, FREE, freeman, front, full build, gcode, GHOST, ghost ring, Handgun, hi, hi point, hi point 9, hipoint, hipoint slide, how to build taurus, how to make a 3d shield, kit, lower, lpk, MAG, magazine, man, modifiable, parts, parts kit, pew, pla, point, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, ring, shield, sights, slide for hipoint, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, trigger lock, unregistered, upk Product ID: 26307$210.003D-G3 complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G3 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS, NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G3 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G3 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 10 rnd, 2x, 3D, 3d print kit, 3d-g3 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, front, full build, g3, gcode, Handgun, how to make a g3, kit, lower, lpk, magazine, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk, Upper Product ID: 25880$375.003D-G2C complete kit W/FREE FILES
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G2C in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .(BRAND NEW PARTS,MAGAZINE,TRIGGER LOCK,EXTRA SIGHTS,NEVER BEEN SHOT PARTS)This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE . THE SECOND FILE IS A RAW,UNPRINTABLE STL FILE OF THE FREEMAN FILE. The micro SD has A G2C file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G2C at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick . https://www.youtube.com/watch?v=V11vW50Cv9s&t=40s
Categories: 3D Printing, Built Rifle Uppers Tags: 2c, 3D, 3d print kit, 3d-g2c 3d print kit, 9mm, barrel, Build, Build kit, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, FREE, freeman, front, full build, g2C, gcode, Handgun, how to make a g2c, kit, lower, lpk, man, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, taurus, taurus build, TAURUS BUILD KIT, tough, unregistered, unregistered 1776, upk, Upper Product ID: 25874$375.00$325.003D-26 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 26, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, g26, gcode, Glock, grippy, gun, Handgun, how to make a g26, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24904$413.003D-17 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 17, 1776, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, G17, gcode, Glock, grippy, gun, Handgun, how to make a g17, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24798$413.003D-19 COMPLETE KIT
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G19 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 19 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 19, 3D, 3d print kit, 9mm, barrel, Build, Build kit, chairman, chairmanwon, complete, complete kit, creality, diy, durable, easy, ENDER, Ender 3, Ender 3V2, file, firearm, Frame, front, full build, G19, gcode, Glock, grippy, gun, Handgun, how to make a g19, kit, lower, lpk, modifiable, parts, parts kit, pla, polylactic acid, polymaker, polymax, print, print ready, printed, printer, rails, Raw, ready, rear, recoil, spring, STL, strong, tough, twisty, twistygrippy, unregistered, upk, Upper, won Product ID: 24796$413.003D-17 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G17 kit in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 17 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G19 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to clos to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 17, 1776, 1776 SUPPLY, 3D, 3d print kit, 3d printer, 3D-17, 3d-seventeen, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download glock, easiest way to make a glock, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, front, full build, g 17, G17, gcode, Glock, glock 17, gun, how to build a, how to build a glock, how to print a glock, Lower parts kit, lpk, memory, micro sd, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, seventeen, STL, supply, tough pla, twisty grippy, unregistered, upk, Upper, upper parts kit, with filament, with sights, won Product ID: 24340$500.003D-26 COMPLETE BOX
The new 3d printed kits are here!! This kit comes with everything needed to print, and complete a G26 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done .;This kit is designed to take 3d printed firearms building and put it in the normal persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today. Contained on the SD card are two different files, ONE FILE IS THE 1776,MODIFIED,PRINT READY GCODE based on the chairman won twisty grippy. THE SECOND FILE IS A RAW,UNPRITABLE STL FILE OF THE CHAIRMAN WON TWISTY GRIPPY. The micro SD has A 26 file loaded and set up for print. Just load this into your 3d printer and your off!! You are 1 click away from 3d printing your very own G26 at home. We did all modifications necessary to the 1776 file beforehand to give you the most successful print. Make sure your bed is level ,and not to far or to close to the nozzle ,a paper thickness is a great place to start. Don’t forget the Adhesion stick .
Category: 3D Printing Tags: 1776, 1776 SUPPLY, 26, 3D, 3d print kit, 3d printer, 3D-26, 3d-twenty six, 9mm, box, Build, build a glock, Build kit, bundle, card, chairman, chairmanwon, complete, complete kit, download, download glock, easiest way to make a glock, ENDER, Ender 3, Ender 3V2, everything for a gun kit, filament, file, files, firearm, firearms, Frame, front, full build, g 26, g26, gcode, Glock, glock 26, gun, how to build a, how to build a glock, how to print a glock, Lower parts kit, lpk, memory, micro sd, package, polymaker, polymax, print, print ready, printed, rails, raw stl, rear, recoil spring, sd, SD card, STL, supply, tough pla, twenty six, twisty grippy, unregistered, upk, Upper, upper parts kit, with filament, with sights, won Product ID: 24337$500.00SG-22 COMPLETE BOX w upper.
The new 3d printed sg 22 kits are here!! This kit comes with everything needed to print, and complete a SG-22 in your home. This is the most complete 3d print kit to date!! This kit comes with everything needed to get the job done ,including a micro SD card with he SG-22 and all modifications already made for a successful print, Just insert the card and hit print. No need to make any modifications to the file. This box takes 3d printed firearms and puts it in the everyday persons hands. This is the new age of firearms building, this is where the future of firearms is going. Start your future build today.
Category: 3D Printing Tags: 3d print kit, barrel, barrel comp, Bcg, booligan, box, Build kit, build kit with upper, charging, charging handle, comp, compatible, Compensator, complete, complete kit, download files for printing the sg-22, easiest way to make an sg22, file, files, files for the sg-22, full build, handle, how to build a sg-22, how to build sg22, kit, memory, memory card, micro, micro sd, package, parts for sg-22, parts to build sg-22, sd, sg, sg with upper, sg-22, sg22, spark, ssg, ssg-22, ssg22, stark, sub, u-p-k, unregistered, upk, Upper, upper parts kit Product ID: 23953$700.00